Fluke 1AC-II VoltAlert Pocket-sized voltage detector

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home

    Voltbeat™ technology and continuous self-test — so you always know it’s working
    Upon detection, tip glows and beeper sounds
    CAT IV 1000 V for added protection
    Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
    20 V to 90 V AC control circuit model also available
    Two-year warranty

Specifications
Operating principle    
     Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges    
     Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style    
     Blade or round, depending on model
Light source    
     One high intensity red LED
Agency Approvals    
     c CSA us, CE, C-Tick
Safety Rating    
     1000 V, CAT IV
IP Rating    
     IP 40
Operating Temperature     
     -10 °C to 50 °C
Operating humidity ranges    
0 % to 95 %      (0 °C to 30 °C)
0 % to 75 %      (30 °C to 40 °C)
0 % to 45 %      (40 °C to 55 °C)
Operating Altitude    
     3000 meters
Batteries     
     2 AAA alkaline batteries included

Note: Product does not respond to random electrostatic discharge.