Martindale EPAT 1600 Manual Portable Appliance Tester

The EasyPAT 1600 is a legal minimum tester suitable for high speed, low cost testing.

• Does both mandatory tests and has a built-in fuse test  
• 25A, 8A and 100mA (for computers etc.) earth bond tests selectable with a simple rocker switch  
• Incorporates an extension lead tester to test IEC leads (can also be used to test 110V extension leads with a MAREX331 adaptor)   
• Tests both 110V and 240V appliances for 240V supply

  The EasyPAT 1600 is a legal minimum tester suitable for high

  speed low cost testing.

  It preserves the 2100’s speed of use and simplicity and is an

  ideal PAT for those needing to do the legal minimum as

  quickly as possible.

  • Does both mandatory tests and has a built in fuse test

  • 25A, 8A and 100mA (for computers, etc) earth bond

  tests selectable with a simple rocker switch

  • Incorporates an extension lead tester to test IEC leads

  (can also be used to test 110V extension leads with a

  MAREX331 adaptor).

  SPECIFICATIONS

  ELECTRICAL

  Supply Voltage:

  230V±10% 50/60Hz

  Power Consumption:

  10/220VA

  EARTH CONTINUITY TEST (8A & 25A)

  Test Voltage:

  6V AC nominal with no load

  Test Current:

  0.1

  25A AC nom @ 0.1Ω (25A), 8A AC nom @Ω (8A)

  Display Range:

  0 - 1.99Ω

  Accuracy of Indication:

  ±10% of reading ±2 digits

  EARTH CONTINUITY TEST (100MA)

  Test Voltage:

  130mV DC nominal open circuit

  Test Current:

  100mA DC nominal constant current

  Range:

  0 - 1.99Ω

  Accuracy of Indication:

  ±10% of reading ±2 digit

  INSULATION TEST

  Test Voltage:

  500V DC -0% +20% at 0.5MΩ

  Short Circuit Current:

  1.5mA DC nominal

  Display Range:

  0 - 19.9MΩ

  Accuracy Of Indication:

  ±5% of reading ±1 digit

  FUSE TEST

  Test Voltage:

  6V AC nominal

  Over range threshold:

  10kΩ nominal

  Zero range threshold:

  800kΩ nominal

  LEADS

  Mains:

  1.7M fixed lead, with a 13A moulded plug

  Earth Continuity:

  crocodile/alligator clip.

  3M long, detachable lead, heavy duty

  230V IEC Adaptor:

  230mm long.

  13A BS1363 plug to IEC320 connector,

  SOCKETS

  Mains:

  110V 16A to BS4343

  Leadtest:

  LAMPS

  Over Temperature:

  temperature limit for the instrument has been exceeded.

  LED extinguishes when unit cools.

  Red LED which illuminates when the

  Lamp 1/ Lamp 2:

  ‘polarity’ for extension lead test facility.

  Red LED’s which illuminate to indicate lead

  FUSES

  Plug:

  13A 1”HBC (Ceramic)

  Internal:

  Internal fuse is not user replaceable.

  3.15A (F) 5x20mm, HBC (Ceramic)

  Safety

  EMC:

  BS EN 50082-1

  Meets BS EN 50081-1

  LVD:

  Meets BS EN 61010-1

  MECHANICAL SPECIFICATION - CASE

  Size:

  330x263x144mm

  Material:

  ABS/Polycarbonate

  Colour:

  Yellow/Black

  Weight:

  4kg nominal

  ENVIRONMENTAL SPECIFICATION - TEMPERATURE

  Operating:

  0 °C to 35°C

  Storage:

  This instrument has been designed to be used in a clean dry

  environment.

  Do not use the instrument outdoors or in wet conditions.

  -10 °C to 50°CIEC320230V 13A to BS 1363